Barcode configuration

Barcode configuration#

Important

When modifying the parameters on this page, scan “Start Settings” first, then scan the target setting barcode; scan “End Settings” after completion.

Code Enable#

Important

When modifying this group of parameters, scan “Start Settings” first, then scan the target setting barcode; scan “End Settings” after completion.

All encodings enabled#

Scan the following setting barcode to configure the reading enable/disable status of all supported symbologies. After All Symbologies are disabled, only the setting barcode is allowed to be read.

../../_shared/_images/module-HZ/C_CMD_R111.png

*Allow reading of All Symbologies#
../../_shared/_images/module-HZ/C_CMD_R000.png

Disable reading of all symbologies#

Default encoding enabled#

../../_shared/_images/module-HZ/C_CMD_RFFF.png

Default code reading system#

QR Code#

Scan the following setting barcode to configure the enabling/disabling status of QR Code barcode reading.

../../_shared/_images/module-HZ/C_CMD_QR01.png

*Allow reading of QR Code#
../../_shared/_images/module-HZ/C_CMD_QR00.png

Disable reading of QR Code#

EAN-13#

Scan the following setting barcode to configure the enable/disable status of EAN-13 barcode reading.

../../_shared/_images/module-HZ/C_CMD_1301.png

*Allow reading of EAN-13#
../../_shared/_images/module-HZ/C_CMD_1300.png

Disable reading EAN-13#

Code 128#

Scan the following setting barcode to configure the enable/disable status of Code 128 barcode reading.

../../_shared/_images/module-HZ/C_CMD_2801.png

*Allow reading of Code 128#
../../_shared/_images/module-HZ/C_CMD_2800.png

Disable reading Code 128#

Code 39#

Scan the following setting barcode to configure the enable/disable status of Code 39 barcode reading.

../../_shared/_images/module-HZ/C_CMD_3901.png

*Allow reading of Code 39#
../../_shared/_images/module-HZ/C_CMD_3900.png

Disable reading Code 39#

Code 32#

../../_shared/_images/module-HZ/C_CMD_39M0.png

Disable Code 32#
../../_shared/_images/module-HZ/C_CMD_39M1.png

Enable Code 32#

Full ASCII Support#

The encoding method of Code 39 can include the representation of all ASCII characters. Through settings, the scan engine can support barcodes containing the full ASCII character set.

../../_shared/_images/module-HZ/C_CMD_39M3.png

Enable Full ASCII#
../../_shared/_images/module-HZ/C_CMD_39M2.png

Disable Full ASCII#

EAN-8#

Scan the following setting barcode to configure the enabling/disabling status of EAN-8 barcode reading.

../../_shared/_images/module-HZ/C_CMD_0801.png

*Allow reading EAN-8#
../../_shared/_images/module-HZ/C_CMD_0800.png

Disable reading EAN-8#

UPC-A#

Scan the following setting barcode to configure the enabling/disabling status of UPC-A barcode reading.

../../_shared/_images/module-HZ/C_CMD_CA01.png

*Allow reading of UPC-A#
../../_shared/_images/module-HZ/C_CMD_CA00.png

Disable reading UPC-A#

UPC-E0#

Scan the following setting barcode to configure the enabling/disabling status of UPC-E0 barcode reading.

../../_shared/_images/module-HZ/C_CMD_E001.png

*Allow reading UPC-E0#
../../_shared/_images/module-HZ/C_CMD_E000.png

Disable reading UPC-E0#

UPC-E1#

Scan the following setting barcode to configure the enabling/disabling status of UPC-E1 barcode reading.

../../_shared/_images/module-HZ/C_CMD_E101.png

*Allow reading UPC-E1#
../../_shared/_images/module-HZ/C_CMD_E100.png

Disable reading UPC-E1#

Interleaved 2 of 5#

Scan the following setting barcode to configure the enabling/disabling status of Interleaved 2 of 5 barcode reading.

../../_shared/_images/module-HZ/C_CMD_IT01.png

*Allow reading Interleaved 2 of 5#
../../_shared/_images/module-HZ/C_CMD_IT00.png

Disable Reading Interleaved 2 of 5#

Codabar#

../../_shared/_images/module-HZ/C_CMD_BA01.png

Allow reading Codabar#
../../_shared/_images/module-HZ/C_CMD_BA00.png

Disable reading Codabar#

Code 93#

../../_shared/_images/module-HZ/C_CMD_9301.png

Allow reading Code 93#
../../_shared/_images/module-HZ/C_CMD_9300.png

Disable reading Code 93#

PDF417#

../../_shared/_images/module-HZ/C_CMD_PDF1.png

Allow reading PDF417#
../../_shared/_images/module-HZ/C_CMD_PDF0.png

Disable reading PDF417#

Data Matrix#

../../_shared/_images/module-HZ/C_CMD_DM01.png

Allow reading Data Matrix#
../../_shared/_images/module-HZ/C_CMD_DM00.png

Disable reading Data Matrix#